Pulnix TS-9720EN Series Instrukcja Obsługi Pobierz pdf (Strona 20)

Page 10

Installation and Operation

VIS 300/400 EN Setup Software

2.5.1 (e) File=>Print sends the print job to the printer

2.5.1 (f) File=>Exit exits the program.

2.5.2 Menu Bar Edit Commands

FIGURE 12. Edit Commands

2.5.2 (a) Edit=>Copy Settings from Camera

This command will copy the current settings from the selected camera into memory so it later on can be

pasted into other cameras. This makes it very easy to copy system specific settings from one camera to

many other cameras. These settings do not include camera-specific settings such as Static IP-address

and User Information but only the system-specific information’s.

2.5.2 (b) Edit=>Paste Settings to Camera(s)

This command will paste the previously copied system-specific settings to one or more cameras

selected. This makes it very easy to copy system specific settings from one camera to many other

cameras. These settings do not include camera-specific settings such as Static IP-address and User

Information but only the system-specific information’s.

2.5.3 Tree view

The cameras in the tree view are identified by their IP and MAC addresses. Color cameras are identified

with the small “Rainbow” icon behind the camera icon.

The property-grid shows the properties for the camera selected. The camera is selected by clicking the

primary mouse button on the camera icon or label.

More cameras can be selected at the same time by holding the Ctrl-key activated while clicking the

primary mouse button while pointing on the cameras. When more cameras are selected the property-

grid shows the properties that are equal for the cameras. Properties that are not equal are left blank.

Properties can also easily be set to the same value for more cameras this way.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 71 72

Brak uwag

Pulnix TS-9720EN Series Instrukcja Obsługi Strona 20